 Rapid Site Characterization Pre-Construction Contamination Profiling Risk Based Corrective Action (RBCA) Environmental Site Remediation System Design Permitting, Drilling, and Sampling |
|
A FULL SERVICE ENVIRONMENTAL CONSULTING FIRM (530) 668-5300; Fax (530) 662-0273; wege@cal.net |
Real Estate Assessments - Environmental Site Assessmentor WHAT LIES BENEATH Every colored square on this map shows were contamination has been released into the soil and/or groundwater. Many of them have a contaminated groundwater plume associated with them. Contaminated plumes can lead to soil vapor problems. Map from GeoTracker. Western Geo-Engineers' experience of over 20 years in environmental investigations and remedial actions has uniquely qualified us to perform real estate environmental site assessments. We have experience in predicting and mapping the flow of contamination into groundwater and the resulting contaminated plumes. We have observed and modeled how these plumes can be expected to effect properties that they migrate onto either by contaminating the groundwater or by off gassing vapors. Western Geo-Engineers has performed Phase I, Phase II and Phase III assessments on a number of properties, from simple undeveloped lots to large multiple property projects. Phase 1 Environmental Site AssessmentsThe objective of a Phase I Environmental Site Assessment is to determine whether the property has been subjected to the presence or likely presence of hazardous materials or wastes, including petroleum products, under conditions that indicate an existing release, a past release, or any material threat of a release of those materials or wastes into the ground, groundwater, or surface water of the property. WEGE conducts Environmental Site Assessments to the standards put forth by ASTM E 1527 – 05. Western Geo-Engineers (530)668-5300, wege@cal.net, http://www.western-geo.com |
